Acquire the system which will enhance your business
1 / 8
Laserscan
Laser Range Finder
Compact industrial laser distance sensor for non-contact measurement of absolute distances from 0.05 to 30 m. It measures directly on natural surfaces, with no reflector needed, and needs no maintenance.
We guarantee an accuracy of ±1 mm and a repeatability of 0.25 mm, which is better than comparable sensors in its class. A rugged IP65 aluminium housing, a standard 4–20 mA output and simple set-up make it easy to build into machines, cranes, warehouses and process lines.
KEY ADVANTAGES
- guaranteed accuracy ±1 mm
- repeatability 0.25 mm
- measurement on natural surfaces, no reflector required
- visible red laser spot for easy aiming
- compact, rugged aluminium housing, IP65
- maintenance-free operation
APPLICATIONS
- positioning of cranes, trolleys and transfer cars
- level measurement in silos, bunkers and tanks
- roll and coil diameter monitoring
- height, length and position control on production lines
- warehouse and logistics automation
SPECIFICATION
- measuring range: 0.05 to 30 m on natural surfaces (up to about 20 m on matt, dark surfaces)
- accuracy: ±1 mm
- repeatability: 0.25 mm
- light source: visible red laser, 620–690 nm, laser class 2
- outputs: programmable analogue 0/4–20 mA; RS-232 for configuration
- power supply: 24 V DC ±10%, 0.1 A max.
- operating temperature: −10 °C to +50 °C
- storage temperature: −40 °C to +70 °C
- degree of protection: IP65
- connector: M12, 5-pin
EASY SET-UP
Connect the sensor to a PC through RS-232, set the measuring span, the output current range and the sampling rate with the configuration software, and install it on the line. From then on it works on its own and sends the distance to your controller over the 4–20 mA current loop. For the best analogue accuracy, set the span as short as your application allows.
